Information for
Quick links
Faculties
Veröffentlichungsliste Christian Motz (2000-2023)
Felten, M., Nowak, J., Beyss, O., Grünewald, P., Motz, C., Zander, D.
The effect of time dependent native oxide surface conditions on the electrochemical corrosion resistance of Mg and Mg-Al-Ca alloys
(2023) Corrosion Science, 212, art. no. 110925, .
www.scopus.com/inward/record.uri
DOI: 10.1016/j.corsci.2022.110925
Laub, M., Bachmann, B.-I., Detemple, E., Scherff, F., Staudt, T., Müller, M., Britz, D., Mücklich, F., Motz, C.
Determination of grain size distribution of prior austenite grains through a combination of a modified contrasting method and machine learning [Bestimmung der Korngrößenverteilung von ehemaligen Austenitkörnern unter Anwendung einer Kombination aus einem modifizierten Kontrastierverfahren und maschinellem Lernen]
(2023) Praktische Metallographie/Practical Metallography, 60 (1), pp. 4-36.
www.scopus.com/inward/record.uri
DOI: 10.1515/pm-2022-1025
Medina-Clavijo, B., Rafael-Velayarce, J., Modin, E., Saez-de-Buruaga, M., Soler, D., Motz, C., Arrazola, P.J., Chuvilin, A.
Mechanical properties of friction induced nanocrystalline pearlitic steel
(2022) Scientific Reports, 12 (1), art. no. 12591, .
www.scopus.com/inward/record.uri
DOI: 10.1038/s41598-022-16848-2
Gruenewald, P., Hautz, N., Motz, C.
Implementation of an experimental setup to qualitatively detect hydrogen permeation along grain boundaries in nickel using Scanning Kelvin Probe Force Microscopy under varying atmospheres
(2022) International Journal of Hydrogen Energy, 47 (35), pp. 15922-15932.
www.scopus.com/inward/record.uri
DOI: 10.1016/j.ijhydene.2022.03.072
Rauber, J., Motz, C., Schaefer, F.
Quantitative thermography: a powerful but simple tool to assess the fatigue strength of metals in a one-specimen test–capabilities and limitations in the test setup
(2022) International Journal of Structural Integrity, .
www.scopus.com/inward/record.uri
DOI: 10.1108/IJSI-05-2022-0074
Chen, X., Richeton, T., Motz, C., Berbenni, S.
Surface effects on image stresses and dislocation pile-ups in anisotropic bi-crystals
(2021) International Journal of Plasticity, 143, art. no. 102967, .
www.scopus.com/inward/record.uri
DOI: 10.1016/j.ijplas.2021.102967
Luksch, J., Jung, A., Pauly, C., Derr, R., Gruenewald, P., Laub, M., Klaus, M., Genzel, C., Motz, C., Mücklich, F., Schaefer, F.
Ni/al-hybrid cellular foams: An interface study by combination of 3d-phase morphology imaging, microbeam fracture mechanics and in situ synchrotron stress analysis
(2021) Materials, 14 (13), art. no. 3473, .
www.scopus.com/inward/record.uri
DOI: 10.3390/ma14133473
Renk, O., Maier-Kiener, V., Motz, C., Eckert, J., Kiener, D., Pippan, R.
How the interface type manipulates the thermomechanical response of nanostructured metals: A case study on nickel
(2021) Materialia, 15, art. no. 101020, .
www.scopus.com/inward/record.uri
DOI: 10.1016/j.mtla.2021.101020
Felten, M., Nowak, J., Grünewald, P., Schäfer, F., Motz, C., Zander, D.
The Role of Native Oxides on the Corrosion Mechanism of Laves Phases in Mg–Al–Ca Composites
(2021) Minerals, Metals and Materials Series, pp. 217-225.
www.scopus.com/inward/record.uri
DOI: 10.1007/978-3-030-72432-0_22
Nouailhetas, Q., Koblischka-Veneva, A., Koblischka, M.R., Naik, P.K.S., Schäfer, F., Ogino, H., Motz, C., Berger, K., Douine, B., Slimani, Y., Hannachi, E.
Magnetic phases in superconducting, polycrystalline bulk FeSe samples
(2021) AIP Advances, 11 (1), art. no. 015230, .
www.scopus.com/inward/record.uri
DOI: 10.1063/9.0000167
Grünewald, P., Rauber, J., Marx, M., Motz, C., Schaefer, F.
Fatigue crack growth in micro specimens as a tool to measure crack–microstructure interactions
(2020) Fatigue and Fracture of Engineering Materials and Structures, 43 (12), pp. 3037-3049.
www.scopus.com/inward/record.uri
DOI: 10.1111/ffe.13354
Pratama, K., Motz, C.
Strategies to Achieve High Strength and Ductility of Pulsed Electrodeposited Nanocrystalline Co-Cu by Tuning the Deposition Parameters
(2020) Molecules (Basel, Switzerland), 25 (21), .
www.scopus.com/inward/record.uri
DOI: 10.3390/molecules25215194
Pratama, K., Barrirero, J., Mücklich, F., Motz, C.
microstructure evolution and mechanical stability of supersaturated solid solution Co-rich nanocrystalline Co-Cu produced by pulsed electrodeposition
(2020) Materials, 13 (11), art. no. 2616, .
www.scopus.com/inward/record.uri
DOI: 10.3390/ma13112616
Chen, X., Richeton, T., Motz, C., Berbenni, S.
Atomic force microscopy study of discrete dislocation pile-ups at grain boundaries in bi-crystalline micro-pillars
(2020) Crystals, 10 (5), art. no. 411, .
www.scopus.com/inward/record.uri
DOI: 10.3390/cryst10050411
Velayarce, J.R., Motz, C.
Effect of sample size and crystal orientation on the fatigue behaviour of single crystalline microbeams
(2020) Materials, 13 (3), art. no. 741, .
www.scopus.com/inward/record.uri
DOI: 10.3390/ma13030741
El Azhari, I., García, J., Zamanzade, M., Soldera, F., Pauly, C., Motz, C., Llanes, L., Mücklich, F.
Micromechanical investigations of CVD coated WC-Co cemented carbide by micropillar compression
(2020) Materials and Design, 186, art. no. 108283, .
www.scopus.com/inward/record.uri
DOI: 10.1016/j.matdes.2019.108283
Grützmacher, P.G., Rammacher, S., Rathmann, D., Motz, C., Mücklich, F., Suarez, S.
Interplay between microstructural evolution and tribo-chemistry during dry sliding of metals
(2019) Friction, 7 (6), pp. 637-650.
www.scopus.com/inward/record.uri
DOI: 10.1007/s40544-019-0259-5
Chen, X., Richeton, T., Motz, C., Berbenni, S.
Elastic fields due to dislocations in anisotropic bi- and tri-materials: Applications to discrete dislocation pile-ups at grain boundaries
(2019) International Journal of Solids and Structures, 164, pp. 141-156.
www.scopus.com/inward/record.uri
DOI: 10.1016/j.ijsolstr.2019.01.020
Thielen, M., Schaefer, F., Gruenewald, P., Laub, M., Marx, M., Meixner, M., Klaus, M., Motz, C.
In situ synchrotron stress mappings to characterize overload effects in fatigue crack growth
(2019) International Journal of Fatigue, 121, pp. 155-162.
www.scopus.com/inward/record.uri
DOI: 10.1016/j.ijfatigue.2018.12.013
Zamanzade, M., Müller, C., Velayarce, J.R., Motz, C.
Susceptibility of different crystal orientations and grain boundaries of polycrystalline Ni to hydrogen blister formation
(2019) International Journal of Hydrogen Energy, 44 (14), pp. 7706-7714.
www.scopus.com/inward/record.uri
DOI: 10.1016/j.ijhydene.2019.01.263
Müller, C., Zamanzade, M., Motz, C.
The impact of hydrogen on mechanical properties; A new in situ nanoindentation testing method
(2019) Micromachines, 10 (2), art. no. 114, .
www.scopus.com/inward/record.uri
DOI: 10.3390/mi10020114
Pratama, K., Kunz, F., Lindner, L., Schmauch, J., Mücklich, F., Motz, C.
Thermal stability, phase decomposition, and micro-fatigue properties of pulsed electrodeposited nanocrystalline Co-Cu
(2019) Procedia Structural Integrity, 23, pp. 366-371.
www.scopus.com/inward/record.uri
DOI: 10.1016/j.prostr.2020.01.114
Rathmann, D., Pratama, K., Bachmaier, A., Marx, M., Motz, C.
Thermal and Mechanical Stability of Nano-Crystalline and Nano-Structured Metals
(2019) Structural Integrity, 5, pp. 345-346.
www.scopus.com/inward/record.uri
DOI: 10.1007/978-3-319-91989-8_78
Luksch, J., Jung, A., Pauly, C., Motz, C., Mücklich, F., Schaefer, F.
Effect of pretreatment on interface stability and morphology of Ni/Al hybrid foams by in situ microcantilever fracture experiment
(2019) Procedia Structural Integrity, 17, pp. 206-213.
www.scopus.com/inward/record.uri
DOI: 10.1016/j.prostr.2019.08.028
Gruenewald, P., Rauber, J., Marx, M., Motz, C., Schaefer, F.
Acquiring in situ fatigue crack growth curves by a compliance method for micro bending beams to reveal the interaction of fatigue cracks with grain boundaries
(2019) Procedia Structural Integrity, 17, pp. 13-20.
www.scopus.com/inward/record.uri
DOI: 10.1016/j.prostr.2019.08.003
Gruenewald, P., Schaefer, F., Thielen, M., Marx, M., Motz, C.
Small scale fracture mechanics of ductile materials: Advantage of fatigue precracks and comparison of J-integral evaluations
(2018) Materialia, 4, pp. 104-108.
www.scopus.com/inward/record.uri
DOI: 10.1016/j.mtla.2018.09.011
Medina-Clavijo, B., Saez-de-Buruaga, M., Motz, C., Soler, D., Chuvilin, A., Arrazola, P.J.
Microstructural aspects of the transition between two regimes in orthogonal cutting of AISI 1045 steel
(2018) Journal of Materials Processing Technology, 260, pp. 87-96.
www.scopus.com/inward/record.uri
DOI: 10.1016/j.jmatprotec.2018.05.016
Jung, A., Luksch, J., Diebels, S., Schäfer, F., Motz, C.
In-situ and ex-situ microtensile testing of individual struts of Al foams and Ni/Al hybrid foams
(2018) Materials and Design, 153, pp. 104-119.
www.scopus.com/inward/record.uri
DOI: 10.1016/j.matdes.2018.04.075
Eisenhut, L., Fell, J., Motz, C.
Local characterization of precipitation and correlation with the prior austenitic microstructure in Nb-Ti-microalloyed steel by SEM and AFM methods
(2018) Metals, 8 (8), art. no. 636, .
www.scopus.com/inward/record.uri
DOI: 10.3390/met8080636
Rafael Velayarce, J., Zamanzade, M., Torrents Abad, O., Motz, C.
Influence of single and multiple slip conditions and temperature on the size effect in micro bending
(2018) Acta Materialia, 154, pp. 325-333.
www.scopus.com/inward/record.uri
DOI: 10.1016/j.actamat.2018.05.054
Krämer, T., Eisenhut, L., Germain, L., Rupp, D., Detemple, E., Motz, C.
Assessment of EBSD Analysis and Reconstruction Methods as a Tool for the Determination of Recrystallized Fractions in Hot-Deformed Austenitic Microstructures
(2018) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 49 (7), pp. 2795-2802.
www.scopus.com/inward/record.uri
DOI: 10.1007/s11661-018-4593-4
Zamanzade, M., Hasemann, G., Motz, C., Krüger, M., Barnoush, A.
Vacancy effects on the mechanical behavior of B2-FeAl intermetallics
(2018) Materials Science and Engineering A, 712, pp. 88-96.
www.scopus.com/inward/record.uri
DOI: 10.1016/j.msea.2017.11.054
Rathmann, D., Marx, M., Motz, C.
Crack propagation and mechanical properties of electrodeposited nickel with bimodal microstructures in the nanocrystalline and ultrafine grained regime
(2017) Journal of Materials Research, 32 (24), pp. 4573-4582.
www.scopus.com/inward/record.uri
DOI: 10.1557/jmr.2017.353
Kapp, M.W., Kremmer, T., Motz, C., Yang, B., Pippan, R.
Structural instabilities during cyclic loading of ultrafine-grained copper studied with micro bending experiments
(2017) Acta Materialia, 125, pp. 351-358.
www.scopus.com/inward/record.uri
DOI: 10.1016/j.actamat.2016.11.040
Thielen, M., Marx, M., Motz, C.
Measuring the influence of resdual stresses on fatigue crack propagation by DIC, Bemi and synchrotron diffraction
(2017) ICF 2017 - 14th International Conference on Fracture, 2, pp. 305-306.
www.scopus.com/inward/record.uri
Motz, C., Zamanzade, M., Velayarce, J.
Influence of dislocation - Grain boundary interactions on the damage evolution studied by in-situ micro fatigue experiments
(2017) ICF 2017 - 14th International Conference on Fracture, 1, pp. 326-327.
www.scopus.com/inward/record.uri
Schaefer, F., Lang, E.P.W., Bick, M., Knorr, A.F., Marx, M., Motz, C.
Assessing the intergranular crack initiation probability of a grain boundary distribution by an experimental misalignment study of adjacent slip systems
(2017) Procedia Structural Integrity, 5, pp. 547-554.
www.scopus.com/inward/record.uri
DOI: 10.1016/j.prostr.2017.07.161
Schaefer, F., Thielen, M., Marx, M., Motz, C.
How to measure a dislocation’s breakthrough stress to estimate the grain boundary resistance against slip transfer based on the dfz-model of fracture
(2017) Solid State Phenomena, 258 SSP, pp. 93-96.
www.scopus.com/inward/record.uri
DOI: 10.4028/www.scientific.net/SSP.258.93
Eisenhut, L., Schaefer, F., Gruenewald, P., Weiter, L., Marx, M., Motz, C.
Effect of a dislocation pile-up at the neutral axis on trans-crystalline crack growth for micro-bending fatigue
(2017) International Journal of Fatigue, 94, pp. 131-139.
www.scopus.com/inward/record.uri
DOI: 10.1016/j.ijfatigue.2016.09.015
Schäfer, F., Weiter, L., Marx, M., Motz, C.
Quantifying the grain boundary resistance against slip transfer by experimental combination of geometric and stress approach using stage-I-fatigue cracks
(2016) Philosophical Magazine, 96 (32-34), pp. 3524-3551.
www.scopus.com/inward/record.uri
DOI: 10.1080/14786435.2016.1235289
Bachmaier, A., Schmauch, J., Aboulfadl, H., Verch, A., Motz, C.
On the process of co-deformation and phase dissolution in a hard-soft immiscible Cu-Co alloy system during high-pressure torsion deformation
(2016) Acta Materialia, 115, pp. 333-346.
www.scopus.com/inward/record.uri
DOI: 10.1016/j.actamat.2016.06.010
Zamanzade, M., Velayarce, J.R., Abad, O.T., Motz, C., Barnoush, A.
Mechanical behavior of iron aluminides: A comparison of nanoindentation, compression and bending of micropillars
(2016) Materials Science and Engineering A, 652, pp. 370-376.
www.scopus.com/inward/record.uri
DOI: 10.1016/j.msea.2015.11.088
Zamanzade, M., Barnoush, A., Motz, H.
A review on the properties of iron aluminide intermetallics
(2016) Crystals, 6 (1), art. no. 10, .
www.scopus.com/inward/record.uri
DOI: 10.3390/cryst6010010
Thielen, M., Marx, M., Sheikh-Amiri, M., Boller, C., Motz, C.
How microscopic stress and strain analysis can improve the understanding of the interplay between material properties and variable amplitude fatigue
(2016) Procedia Structural Integrity, 2, pp. 3194-3201.
www.scopus.com/inward/record.uri
DOI: 10.1016/j.prostr.2016.06.398
Thielen, M., Marx, M., Sheikh-Amiri, M., Boller, C., Motz, C.
Using Barkhausen noise and digital image correlation to investigate the influence of local residual stresses on Fatigue-Crack propagation
(2016) Materials Performance and Characterization, 5 (3), .
www.scopus.com/inward/record.uri
DOI: 10.1520/MPC20150059
Eisenhut, L., Rupp, D., Motz, C.
Evolution of the austenitic grain growth of micro-alloyed steels was studied by metallography and EBSD analysis and compared to a grain growth model
(2016) TMP 2016 - 5th International Conference on ThermoMechanical Processing, Advance Programme, .
www.scopus.com/inward/record.uri
Jung, A., Chen, Z., Schmauch, J., Motz, C., Diebels, S.
Micromechanical characterisation of Ni/Al hybrid foams by nano- and microindentation coupled with EBSD
(2016) Acta Materialia, 102, pp. 38-48.
www.scopus.com/inward/record.uri
DOI: 10.1016/j.actamat.2015.09.018
Kerger, P., Rathmann, D., Marx, M., Motz, C.
How to produce a desired bimodal microstructure for optimized mechanical properties: Investigation of the mechanisms of abnormal grain growth in pulsed electro-deposited nickel
(2015) International Journal of Materials Research, 106 (11), pp. 1131-1143.
www.scopus.com/inward/record.uri
DOI: 10.3139/146.111291
Bachmaier, A., Pfaff, M., Stolpe, M., Aboulfadl, H., Motz, C.
Phase separation of a supersaturated nanocrystalline Cu-Co alloy and its influence on thermal stability
(2015) Acta Materialia, 96, pp. 269-283.
www.scopus.com/inward/record.uri
DOI: 10.1016/j.actamat.2015.05.053
Kirchlechner, C., Imrich, P.J., Liegl, W., Pörnbacher, J., Micha, J.-S., Ulrich, O., Motz, C.
On the reversibility of dislocation slip during small scale low cycle fatigue
(2015) Acta Materialia, 94, pp. 69-77.
www.scopus.com/inward/record.uri
DOI: 10.1016/j.actamat.2015.04.029
Tiba, I., Richeton, T., Motz, C., Vehoff, H., Berbenni, S.
Incompatibility stresses at grain boundaries in Ni bicrystalline micropillars analyzed by an anisotropic model and slip activity
(2015) Acta Materialia, 83, pp. 227-238.
www.scopus.com/inward/record.uri
DOI: 10.1016/j.actamat.2014.09.033
Bachmaier, A., Motz, C.
On the remarkable thermal stability of nanocrystalline cobalt via alloying
(2015) Materials Science and Engineering A, 624, pp. 41-51.
www.scopus.com/inward/record.uri
DOI: 10.1016/j.msea.2014.11.062
Bachmaier, A., Stolpe, M., Müller, T., Motz, C.
Phase decomposition and nano structure evolution of metastable nanocrystalline Cu-Co solid solutions during thermal treatment
(2015) IOP Conference Series: Materials Science and Engineering, 89 (1), art. no. 012017, .
www.scopus.com/inward/record.uri
DOI: 10.1088/1757-899X/89/1/012017
Bachmaier, A., Aboulfadl, H., Pfaff, M., Mücklich, F., Motz, C.
Structural evolution and strain induced mixing in Cu-Co composites studied by transmission electron microscopy and atom probe tomography
(2015) Materials Characterization, 100, pp. 178-191.
www.scopus.com/inward/record.uri
DOI: 10.1016/j.matchar.2014.12.022
Bachmaier, A., Motz, C., Pippan, R.
Manufacture of ultra high-strength and thermally stable nano-crystalline metallic composite materials with high deformation [Herstellung höchstfester und thermisch stabiler nanokristalliner metallischer Verbundwerkstoffe mit Hochverformung]
(2014) Metall, 68 (11), p. 860.
www.scopus.com/inward/record.uri
Wimmer, A., Smolka, M., Heinz, W., Detzel, T., Robl, W., Motz, C., Eyert, V., Wimmer, E., Jahnel, F., Treichler, R., Dehm, G.
Temperature dependent transition of intragranular plastic to intergranular brittle failure in electrodeposited Cu micro-tensile samples
(2014) Materials Science and Engineering A, 618, pp. 398-405.
www.scopus.com/inward/record.uri
DOI: 10.1016/j.msea.2014.09.029
Bachmaier, A., Neubauer, E., Kitzmantel, M., Pippan, R., Motz, C.
Microstructural evolution in immiscible alloys processed by High-Pressure Torsion
(2014) IOP Conference Series: Materials Science and Engineering, 63 (1), art. no. 012023, .
www.scopus.com/inward/record.uri
DOI: 10.1088/1757-899X/63/1/012023
Imrich, P.J., Kirchlechner, C., Motz, C., Dehm, G.
Differences in deformation behavior of bicrystalline Cu micropillars containing a twin boundary or a large-angle grain boundary
(2014) Acta Materialia, 73, pp. 240-250.
www.scopus.com/inward/record.uri
DOI: 10.1016/j.actamat.2014.04.022
Höppel, H.W., Pippan, R., Motz, C., Le Bourhis, E.
Nanostructured materials
(2012) Advanced Engineering Materials, 14 (11), p. 941.
www.scopus.com/inward/record.uri
DOI: 10.1002/adem.201200306
Beinik, I., Kratzer, M., Wachauer, A., Wang, L., Lechner, R.T., Teichert, C., Motz, C., Anwand, W., Brauer, G., Chen, X.Y., Hsu, Y.F., Djurišić, A.B.
Erratum: Electrical properties of ZnO nanorods studied by conductive atomic force microscopy (Journal of Applied Physics (2011) 110 (052005))
(2012) Journal of Applied Physics, 112 (7), art. no. 079903, .
www.scopus.com/inward/record.uri
DOI: 10.1063/1.4758293
Kirchlechner, C., Grosinger, W., Kapp, M.W., Imrich, P.J., Micha, J.-S., Ulrich, O., Keckes, J., Dehm, G., Motz, C.
Investigation of reversible plasticity in a micron-sized, single crystalline copper bending beam by X-ray μlaue diffraction
(2012) Philosophical Magazine, 92 (25-27), pp. 3231-3242.
www.scopus.com/inward/record.uri
DOI: 10.1080/14786435.2012.669067
Yang, B., Motz, C., Rester, M., Dehm, G.
Yield stress influenced by the ratio of wire diameter to grain size - A competition between the effects of specimen microstructure and dimension in micro-sized polycrystalline copper wires
(2012) Philosophical Magazine, 92 (25-27), pp. 3243-3256.
www.scopus.com/inward/record.uri
DOI: 10.1080/14786435.2012.693215
Smolka, M., Motz, C., Detzel, T., Robl, W., Griesser, T., Wimmer, A., Dehm, G.
Novel temperature dependent tensile test of freestanding copper thin film structures
(2012) Review of Scientific Instruments, 83 (6), art. no. 064702, .
www.scopus.com/inward/record.uri
DOI: 10.1063/1.4725529
Wurster, S., Motz, C., Pippan, R.
Characterization of the fracture toughness of micro-sized tungsten single crystal notched specimens
(2012) Philosophical Magazine, 92 (14), pp. 1803-1825.
www.scopus.com/inward/record.uri
DOI: 10.1080/14786435.2012.658449
Motz, C.
Mechanical Testing with the Scanning Electron Microscope
(2012) In-Situ Electron Microscopy: Applications in Physics, Chemistry and Materials Science, pp. 209-225.
www.scopus.com/inward/record.uri
DOI: 10.1002/9783527652167.ch9
Aifantis, K.E., Weygand, D., Motz, C., Nikitas, N., Zaiser, M.
Modeling microbending of thin films through discrete dislocation dynamics, continuum dislocation theory, and gradient plasticity
(2012) Journal of Materials Research, 27 (3), pp. 612-618.
www.scopus.com/inward/record.uri
DOI: 10.1557/jmr.2011.390
Motz, C., Dunstan, D.J.
Observation of the critical thickness phenomenon in dislocation dynamics simulation of microbeam bending
(2012) Acta Materialia, 60 (4), pp. 1603-1609.
www.scopus.com/inward/record.uri
DOI: 10.1016/j.actamat.2011.11.060
Kirchlechner, C., Imrich, P.J., Grosinger, W., Kapp, M.W., Keckes, J., Micha, J.S., Ulrich, O., Thomas, O., Labat, S., Motz, C., Dehm, G.
Expected and unexpected plastic behavior at the micron scale: An in situ μlaue tensile study
(2012) Acta Materialia, 60 (3), pp. 1252-1258.
www.scopus.com/inward/record.uri
DOI: 10.1016/j.actamat.2011.10.058
Dehm, G., Kiener, D., Motz, C., Smolka, M., Pippan, R.
Quantitative Approaches for in situ SEM and TEM Deformation Studies
(2012) Microscopy and Microanalysis, 18 (S2), pp. 736-737.
www.scopus.com/inward/record.uri
DOI: 10.1017/S1431927612005533
Moser, G., Felber, H., Rashkova, B., Imrich, P.J., Kirchlechner, C., Grosinger, W., Motz, C., Dehm, G., Kiener, D.
Sample preparation by metallography and focused ion beam for nanomechanical testing [Probenfertigung mittels Metallographie und lonenmikroskopie für nanomechanische Experimente]
(2012) Praktische Metallographie/Practical Metallography, 49 (6), pp. 343-355.
www.scopus.com/inward/record.uri
DOI: 10.3139/147.110171
Li, H., Wurster, S., Motz, C., Romaner, L., Ambrosch-Draxl, C., Pippan, R.
Dislocation-core symmetry and slip planes in tungsten alloys: Ab initio calculations and microcantilever bending experiments
(2012) Acta Materialia, 60 (2), pp. 748-758.
www.scopus.com/inward/record.uri
DOI: 10.1016/j.actamat.2011.10.031
Beinik, I., Kratzer, M., Wachauer, A., Wang, L., Lechner, R.T., Teichert, C., Motz, C., Anwand, W., Brauer, G., Chen, X.Y., Hsu, X.Y., Djurišić, A.B.
Electrical properties of ZnO nanorods studied by conductive atomic force microscopy
(2011) Journal of Applied Physics, 110 (5), art. no. 052005, .
www.scopus.com/inward/record.uri
DOI: 10.1063/1.3623764
Oh, S.H., Rentenberger, C., Im, J., Motz, C., Kiener, D., Karnthaler, H.-P., Dehm, G.
Dislocation plasticity of Al film on polyimide investigated by cross-sectional in situ transmission electron microscopy straining
(2011) Scripta Materialia, 65 (5), pp. 456-459.
www.scopus.com/inward/record.uri
DOI: 10.1016/j.scriptamat.2011.06.001
Kirchlechner, C., Keckes, J., Motz, C., Grosinger, W., Kapp, M.W., Micha, J.S., Ulrich, O., Dehm, G.
Impact of instrumental constraints and imperfections on the dislocation structure in micron-sized Cu compression pillars
(2011) Acta Materialia, 59 (14), pp. 5618-5626.
www.scopus.com/inward/record.uri
DOI: 10.1016/j.actamat.2011.05.037
Senger, J., Weygand, D., Motz, C., Gumbsch, P., Kraft, O.
Aspect ratio and stochastic effects in the plasticity of uniformly loaded micrometer-sized specimens
(2011) Acta Materialia, 59 (8), pp. 2937-2947.
www.scopus.com/inward/record.uri
DOI: 10.1016/j.actamat.2011.01.034
Kirchlechner, C., Kiener, D., Motz, C., Labat, S., Vaxelaire, N., Perroud, O., Micha, J.-S., Ulrich, O., Thomas, O., Dehm, G., Keckes, J.
Dislocation storage in single slip-oriented Cu micro-tensile samples: New insights via X-ray microdiffraction
(2011) Philosophical Magazine, 91 (7-9), pp. 1256-1264.
www.scopus.com/inward/record.uri
DOI: 10.1080/14786431003785639
Wurster, S., Motz, C., Pippan, R.
Notched-cantilever testing on the micrometer scale-effects of constraints on plasticity and fracture behaviour
(2010) 18th European Conference on Fracture: Fracture of Materials and Structures from Micro to Macro Scale, 7 p.
www.scopus.com/inward/record.uri
Kiener, D., Motz, C., Grosinger, W., Weygand, D., Pippan, R.
Cyclic response of copper single crystal micro-beams
(2010) Scripta Materialia, 63 (5), pp. 500-503.
www.scopus.com/inward/record.uri
DOI: 10.1016/j.scriptamat.2010.05.014
Yang, B., Motz, C., Grosinger, W., Dehm, G.
Cyclic loading behavior of micro-sized polycrystalline copper wires
(2010) Procedia Engineering, 2 (1), pp. 925-930.
www.scopus.com/inward/record.uri
DOI: 10.1016/j.proeng.2010.03.100
Senger, J., Weygand, D., Motz, C., Gumbsch, P., Kraft, O.
Evolution of mechanical response and dislocation microstructures in small-scale specimens under slightly different loading conditions
(2010) Philosophical Magazine, 90 (5), pp. 617-628.
www.scopus.com/inward/record.uri
DOI: 10.1080/14786430903213353
Wurster, S., Motz, C., Jenko, M., Pippan, R.
Micrometer-sized specimen preparation based on ion slicing technique
(2010) Advanced Engineering Materials, 12 (1-2), pp. 61-64.
www.scopus.com/inward/record.uri
DOI: 10.1002/adem.200900263
Legras, M., Gianola, D.S., Motz, C.
Quantitative in situ mechanical testing in electron microscopes
(2010) MRS Bulletin, 35 (5), pp. 354-360.
www.scopus.com/inward/record.uri
DOI: 10.1557/mrs2010.567
Matoy, K., Detzel, T., Müller, M., Motz, C., Dehm, G.
Interface fracture properties of thin films studied by using the micro-cantilever deflection technique
(2009) Surface and Coatings Technology, 204 (6-7), pp. 878-881.
www.scopus.com/inward/record.uri
DOI: 10.1016/j.surfcoat.2009.09.013
Kiener, D., Motz, C., Dehm, G., Pippan, R.
Overview on established and novel FIB based miniaturized mechanical testing using in-situ SEM
(2009) International Journal of Materials Research, 100 (8), pp. 1074-1087.
www.scopus.com/inward/record.uri
DOI: 10.3139/146.110149
Matoy, K., Schönherr, H., Detzel, T., Schöberl, T., Pippan, R., Motz, C., Dehm, G.
A comparative micro-cantilever study of the mechanical behavior of silicon based passivation films
(2009) Thin Solid Films, 518 (1), pp. 247-256.
www.scopus.com/inward/record.uri
DOI: 10.1016/j.tsf.2009.07.143
Yang, B., Motz, C., Grosinger, W., Dehm, G.
Stress-controlled fatigue behaviour of micro-sized polycrystalline copper wires
(2009) Materials Science and Engineering A, 515 (1-2), pp. 71-78.
www.scopus.com/inward/record.uri
DOI: 10.1016/j.msea.2009.02.037
Kiener, D., Motz, C., Dehm, G.
Micro-compression testing: A critical discussion of experimental constraints
(2009) Materials Science and Engineering A, 505 (1-2), pp. 79-87.
www.scopus.com/inward/record.uri
DOI: 10.1016/j.msea.2009.01.005
Motz, C., Weygand, D., Senger, J., Gumbsch, P.
Initial dislocation structures in 3-D discrete dislocation dynamics and their influence on microscale plasticity
(2009) Acta Materialia, 57 (6), pp. 1744-1754.
www.scopus.com/inward/record.uri
DOI: 10.1016/j.actamat.2008.12.020
Rester, M., Motz, C., Pippan, R.
Where are the geometrically necessary dislocations accommodating small imprints?
(2009) Journal of Materials Research, 24 (3), pp. 647-651.
www.scopus.com/inward/record.uri
DOI: 10.1557/jmr.2009.0131
Weygand, D., Senger, J., Motz, C., Augustin, W., Heuveline, V., Gumbsch, P.
High performance computing and discrete dislocation dynamics: Plasticity of micrometer sized specimens
(2009) High Performance Computing in Science and Engineering 2008 - Transactions of the High Performance Computing Center Stuttgart, HLRS 2008, pp. 507-523.
www.scopus.com/inward/record.uri
DOI: 10.1007/978-3-540-88303-6_36
Rester, M., Motz, C., Pippan, R.
The deformation-induced zone below large and shallow nanoindentations: A comparative study using EBSD and TEM
(2008) Philosophical Magazine Letters, 88 (12), pp. 879-887.
www.scopus.com/inward/record.uri
DOI: 10.1080/09500830802498978
Rester, M., Motz, C., Pippan, R.
Microstructural investigation of the deformation zone below nano-indents in copper
(2008) Materials Research Society Symposium Proceedings, 1049, pp. 29-34.
www.scopus.com/inward/record.uri
Rester, M., Motz, C., Pippan, R.
Indentation across size scales - A survey of indentation-induced plastic zones in copper {1 1 1} single crystals
(2008) Scripta Materialia, 59 (7), pp. 742-745.
www.scopus.com/inward/record.uri
DOI: 10.1016/j.scriptamat.2008.06.003
Yang, B., Motz, C., Grosinger, W., Kammrath, W., Dehm, G.
Tensile behaviour of micro-sized copper wires studied using a novel fibre tensile module
(2008) International Journal of Materials Research, 99 (7), pp. 716-724.
www.scopus.com/inward/record.uri
DOI: 10.3139/146.101690
Motz, C., Weygand, D., Senger, J., Gumbsch, P.
Micro-bending tests: A comparison between three-dimensional discrete dislocation dynamics simulations and experiments
(2008) Acta Materialia, 56 (9), pp. 1942-1955.
www.scopus.com/inward/record.uri
DOI: 10.1016/j.actamat.2007.12.053
Kiener, D., Motz, C., Dehm, G.
Dislocation-induced crystal rotations in micro-compressed single crystal copper columns
(2008) Journal of Materials Science, 43 (7), pp. 2503-2506.
www.scopus.com/inward/record.uri
DOI: 10.1007/s10853-008-2531-3
Friedl, O., Motz, C., Peterlik, H., Puchegger, S., Reger, N., Pippan, R.
Experimental investigation of mechanical properties of metallic hollow sphere structures
(2008) Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 39 (1), pp. 135-146.
www.scopus.com/inward/record.uri
DOI: 10.1007/s11663-007-9098-2
Rester, M., Motz, C., Pippan, R.
Stacking fault energy and indentation size effect: Do they interact?
(2008) Scripta Materialia, 58 (3), pp. 187-190.
www.scopus.com/inward/record.uri
DOI: 10.1016/j.scriptamat.2007.09.055
Rester, M., Motz, C., Pippan, R.
Microstructural investigation of the volume beneath nanoindentations in copper
(2007) Acta Materialia, 55 (19), pp. 6427-6435.
www.scopus.com/inward/record.uri
DOI: 10.1016/j.actamat.2007.08.001
Csikor, F.F., Motz, C., Weygand, D., Zaiser, M., Zapperi, S.
Dislocation avalanches, strain bursts, and the problem of plastic forming at the micrometer scale
(2007) Science, 318 (5848), pp. 251-254.
www.scopus.com/inward/record.uri
DOI: 10.1126/science.1143719
Kiener, D., Motz, C., Rester, M., Jenko, M., Dehm, G.
FIB damage of Cu and possible consequences for miniaturized mechanical tests
(2007) Materials Science and Engineering A, 459 (1-2), pp. 262-272.
www.scopus.com/inward/record.uri
DOI: 10.1016/j.msea.2007.01.046
Dehm, G., Motz, C., Scheu, C., Clemens, H., Mayrhofer, P.H., Mitterer, C.
Mechanical size-effects in miniaturized and bulk materials
(2006) Advanced Engineering Materials, 8 (11), pp. 1033-1045.
www.scopus.com/inward/record.uri
DOI: 10.1002/adem.200600153
Kiener, D., Motz, C., Schöbert, T., Jenko, M., Dehm, G.
Determination of mechanical properties of copper at the micron scale
(2006) Advanced Engineering Materials, 8 (11), pp. 1119-1125.
www.scopus.com/inward/record.uri
DOI: 10.1002/adem.200600129
You, X., Connolley, T., McHugh, P.E., Cuddy, H., Motz, C.
A combined experimental and computational study of deformation in grains of biomedical grade 316LVM stainless steel
(2006) Acta Materialia, 54 (18), pp. 4825-4840.
www.scopus.com/inward/record.uri
DOI: 10.1016/j.actamat.2006.06.021
Kiener, D., Pippan, R., Motz, C., Kreuzer, H.
Microstructural evolution of the deformed volume beneath microindents in tungsten and copper
(2006) Acta Materialia, 54 (10), pp. 2801-2811.
www.scopus.com/inward/record.uri
DOI: 10.1016/j.actamat.2006.02.024
Pippan, R., Motz, C.
Crack closure: Mechanisms, explanation and prediction
(2005) 11th International Conference on Fracture 2005, ICF11, 6, pp. 4147-4151.
www.scopus.com/inward/record.uri
Motz, C., Friedl, O., Pippan, R.
Fatigue crack propagation in cellular metals
(2005) International Journal of Fatigue, 27 (10-12), pp. 1571-1581.
www.scopus.com/inward/record.uri
DOI: 10.1016/j.ijfatigue.2005.06.044
Motz, C., Schöberl, T., Pippan, R.
Mechanical properties of micro-sized copper bending beams machined by the focused ion beam technique
(2005) Acta Materialia, 53 (15), pp. 4269-4279.
www.scopus.com/inward/record.uri
DOI: 10.1016/j.actamat.2005.05.036
Pippan, R., Strobl, G., Kreuzer, H., Motz, C.
Asymmetric crack wake plasticity - A reason for roughness induced crack closure
(2004) Acta Materialia, 52 (15), pp. 4493-4502.
www.scopus.com/inward/record.uri
DOI: 10.1016/j.actamat.2004.06.014
Pippan, R., Höck, M., Tesch, A., Motz, C., Beschliesser, M., Kestler, H.
Fracture processes, fracture resistance and fatigue crack propagation in gamma TiAl
(2003) Gamma Titanium Aluminides 2003, pp. 521-529.
www.scopus.com/inward/record.uri
Richert, M., Stüwe, H.P., Zehetbauer, M.J., Richert, J., Pippan, R., Motz, Ch., Schafler, E.
Work hardening and microstructure of AlMg5 after severe plastic deformation by cyclic extrusion and compression
(2003) Materials Science and Engineering A, 355 (1-2), pp. 180-185.
www.scopus.com/inward/record.uri
DOI: 10.1016/S0921-5093(03)00046-7
Motz, C., Pippan, R.
Fracture behaviour and fracture toughness of ductile closed-cell metallic foams
(2002) Acta Materialia, 50 (8), pp. 2013-2033.
www.scopus.com/inward/record.uri
DOI: 10.1016/S1359-6454(02)00047-2
Motz, C., Pippan, R.
Deformation behaviour of closed-cell aluminium foams in tension
(2001) Acta Materialia, 49 (13), pp. 2463-2470.
www.scopus.com/inward/record.uri
DOI: 10.1016/S1359-6454(01)00152-5
Richert, M., Stüwe, H.P., Richert, J., Pippan, R., Motz, Ch.
Characteristics features of microstructure of ALMg5 deformed to large plastic strains
(2001) Materials Science and Engineering A, 301 (2), pp. 237-243.
www.scopus.com/inward/record.uri
DOI: 10.1016/S0921-5093(00)01803-7
Motz, Ch., Pippan, R.
Bruchzähigkeit und rißfortschritt in den zellwänden von schaumaluminium
(2000) Materialwissenschaft und Werkstofftechnik, 31 (6), pp. 493-496.
www.scopus.com/inward/record.uri
DOI: 10.1002/1521-4052(200006)31:6<493::AID-MAWE493>3.0.CO;2-C